Summary

This video demonstrates how to create, edit, and save a recipe on a Compact spray machine. Recipes store operating parameters such as reciprocator settings, conveyor speeds, overspray modes, and active guns for consistent production runs.

Quick Guide

Load a Recipe

  1. Select the recipe folder icon (folder with pencil).

  2. In the top-left folder menu, load the desired recipe (example: Recipe 13).

  3. Confirm the recipe is active.

Program Recipe Settings

  1. Reciprocator

    • Set cycles (e.g., 20 cycles/min)

    • Set speed (e.g., 4 m/min)

    • Enable photo bar if required

  2. Conveyors

    • Turn paper conveyor ON (0 = OFF)

    • Set conveyor speed

  3. Overspray Mode

    • Select Push–Pull, Pull Only, or Push Only

  4. Overspray Values

    • Adjust edge overspray

    • Adjust surface overspray

  5. Gun Selection

    • Program active guns (e.g., Guns 3 & 4A)

    • Repeat for B reciprocator (e.g., Guns 3 & 4B)

  6. Recovery Unit

    • Enable if running a hybrid system

Save & Name the Recipe

  1. Press Save.

  2. Enter a recipe name (example: Superfici).

  3. Confirm by pressing the check mark.

  4. Press Save again to finalize.

  5. Verify the recipe appears in the folder with the new name.

Notes (Optional)

  • Use the Notes tab to record:

    • Coating type

    • Solvent

    • Tip sizes

    • Setup reminders

Key Notes

  • Always save twice to confirm changes.

  • Verify active guns and conveyor settings before production.